DT325 Tooling

DT325 Liner Spacer System
DT325 Liner Spacer Refill and Head
DT325 Liner Spacer Refill and Head

The new DT325 Liner Spacer Refill (PVC) and Liner Spacer Head is recommended for flowing soils which may overfill liners during normal sampling procedures. The extra room afforded by the spacer refill keeps the system operating more smoothly and cleanly by preventing stuck liners and preventing clogged drive heads or inner probe rods.

1-800-436-7762 to order today. Ask For:
DT325 Liner Spacer Refill (29609)
DT325 Liner Spacer Head (29358)

   
DT325 Liner Cutter
DT325 Liner Cutter DT325 Liner Cutter in Use

The DT325 Liner Cutter makes two parallel cuts along the length of filled liners. The liner slides along the length of filled liners. The liner slides onto the liner holder and the liner cutter is pulled down the length of the liner as the cutter makes two parallel slits in the liner. After the cut, the sample can be removed or viewed through the top opening. The liner holder can be attached to any flat surface or can be held by a machine vise. The DT325 Liner Cutter makes two parallel slits in the liner to expose the soil core for inspection.

1-800-436-7762 to order today.
Ask for: DT325 Liner Cutter (26155)

 

 

 
 
 
   Copyright 2006 by Kejr, Inc.

:: © Copyright 2006 by Kejr, Inc. : Geoprobe® and Geoprobe Systems® are registered trademarks of Kejr, Inc.